Advantage Plug and Play System for Ponds up to 2,000 Gallons
The Advantage Plug and Play System was designed to take all the guesswork out of designing the perfect pond filter system. Each system comes with, what we are convinced is, the best equipment available for koi ponds today. The equipment for each system is slightly over-sized for the pond. This will ensure you never outgrown your equipment.
Each system has been specifically engineered to be as compact as possible while still allowing maximum water flow. All systems now come plumbed with 2 inch sweep elbows. This guarantees that the equipment setup will be plumbed right every time.
Additional Product Information
-Advantage 10 Bead Filter
-Artesian 1/4 Hp Pump
-Pentair Aquatic Eco-Systems 40 UV Light (1.5" Unions)
-3 Way Valve for UV bypass
-2'x3' Vinyl Equipment Pad
-Electrical Control Tower
Designed for ponds up to 2000 gallons
Actual Water Flow
Through our testing we have found that for clear, healthy water you need to move all the water in a pond through the filter a minimum of once every 3 hours. In most cases the standard 1/4 hp pump will turn over a 2,000 gallon pond in less than two hour.
If you feel that you might need a larger pump to provide more water flow for either aesthetic purposes or you have a higher than normal waterfall, (more than 4 feet above the water surface ) you might want to upgrade the pump. Keep in mind that as you increase the pump size you also increase the amount of electricity it will take to operate your pond.
Testing has shown that the standard 1/4 hp pump on this system will deliver the following flows:
57 gpm (3420 gph) through the system with 0 ft of Head Pressure after the filter. 365 watts
48 gpm (2880 gph) through the system with 5 ft of Head Pressure after the filter. 355 watts
41 gpm (2460 gph) through the system with 10 ft of Head Pressure after the filter. 350 watts
31 gpm (1860 gph) through the system with 15 ft of Head Pressure after the filter. 315 watts
Standard Electrical Control Tower
The electrical usage is divided into two categories. Normal use is the amount of electricity used 24 hours per day under normal use. Backwashing is the amount of electricity used during the backwashing process which averages once a week for approximately 5 minutes. Note: the blower and the pump are never used simultaneously.
|Normal Usage||Backwash Usage|
|1/4 Hp Pump||350 Watts||0 Watts|
|40 Watt HO UV||29 Watts||27 Watts|
|Blower||0 Watts||775 Watts|
|Total:||379 Watts||804 Watts|
No More Surprises
Find out the actual cost to operate this filter system per month by using our